Course Catalog

Stream Restoration - 7 PDH

2014-03-25T10:57:02-07:00

This course is intended primarily for civil engineers, hydraulic engineers, hydrologists, and geologists. Someone completing this course will gain knowledge about stream channel evaluation and stream channel restoration procedures.

In this course, you need to review the

Base price with tax:

Salesprice with discount:

$27.95

Discount:

Tax amount:

Price / KG:

Valve Fundamentals - 4 PDH

2014-03-25T10:58:49-07:00

Course Highlights

Valves are widely used in fluid piping systems to shut off or throttle flow, as well as to prevent backflow, reduce pressure or relieve pressure. This course provides information about the basic components of a valve and their function. There is also information about each of the types of valves in common use, the globe,

Base price with tax:

Salesprice with discount:

$15.95

Discount:

Tax amount:

Price / KG:

$99 Unlimited PDH Subscription (1 Year)

2014-03-26T10:46:20-07:00

How We Work:
When you finish buying your $99 Unlimited PDH Subscription our system automatically

Base price with tax:

Salesprice with discount:

$99.00

Discount:

Tax amount:

Price / KG:

Biofuels Basics - 3 PDH

2014-03-25T10:18:47-07:00

Biofuels include ethanol from grain or sugar, diesel fuel from soybeans, ethanol from cellulosic feedstock, and several other feedstock/fuel combinations. This course provides information about the Biomass Research and Development Board’s seven point Action Plan for development of biofuels. There is also information about and a comparison among the wide variety of possible biofuels, with

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Sharp-Crested Weirs: Open Channel Flow Measurement - 2 PDH

2014-03-25T10:52:17-07:00

Course Highlights

A weir is basically an obstruction in an open channel flow path. Weirs are commonly used for measurement of open channel flow rate. A weir functions by causing

Base price with tax:

Salesprice with discount:

$7.95

Discount:

Tax amount:

Price / KG:

Uniform Open Channel Flow and The Manning Equation -2 PDH

2014-03-25T10:58:17-07:00

Learning Objectives

At the conclusion of this course, the student will

Know the differences between laminar & turbulent, steady
Base price with tax:
Salesprice with discount:
$7.95
Discount:
Tax amount:
Price / KG:
Read more

Flow Measurements in Pipes and Ducts - 3 PDH

2014-03-25T10:36:10-07:00

Learning Objectives

At the conclusion of this course, the student will

Be able to calculate flow rate
Base price with tax:
Salesprice with discount:
$11.95
Discount:
Tax amount:
Price / KG:
Read more

Fuel Cells Green Power - 3 PDH

2014-03-25T10:37:00-07:00

Learning Objectives

At the conclusion of this course, the student will

Be familiar with the basic history of the fuel cell and its development
Be familiar with the basic operating principles of the PEM fuel
Base price with tax:
Salesprice with discount:
$11.95
Discount:
Tax amount:
Price / KG:
Read more

Domestic Wastewater Treatment: EPA Overview - 3 PDH

2014-03-25T10:24:10-07:00

Learning Objectives

At the conclusion of this course, the student will

Be familiar with the wastewater treatment requirements set by the Clean Water Act and subsequent related legislation.

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Hydraulic Jumps and Non-Uniform Open Channel Flow - 2 PDH

2014-03-26T13:29:55-07:00

Learning Objectives

At the conclusion of this course, the student will

Be able to determine the critical
Base price with tax:
Salesprice with discount:
$7.95
Discount:
Tax amount:
Price / KG:
Read more

Basics of Passive Solar Heating - 4 PDH

2014-03-25T10:18:02-07:00

Learning Objectives

At the conclusion of this course, the student will

Be able to name the six components which typically make up a passive solar heating system
Be able to name five basic types of passive solar heating systems

Base price with tax:

Salesprice with discount:

$15.95

Discount:

Tax amount:

Price / KG:

Structural Aluminum Performance-Based Design - 4 PDH

2016-11-16T22:10:37-08:00

Introduction

The core concept discussed in this document presents a broad overview of Performance-Based Structural Aluminum design employing various aluminum grades and aluminum alloys.

Course Description:

Base price with tax:

Salesprice with discount:

$15.95

Discount:

Tax amount:

Price / KG:

Treated Water Storage - 4 PDH

2014-03-26T14:11:53-07:00

Course Outline

1. INTRODUCTION

2. REQUIREMENTS

3. DETERMINATION OF CAPACITY REQUIREMENTS

4. DESIGN AND CONSTRUCTION OF WATER STORAGE FACILITIES

5. REFERENCES

6. TYPICAL DESIGN EXAMPLES

Learning Objectives

Learn about storage requirements to meet peak flow requirements, equalize system pressures, and provide emergency water supply.
Learn about system pressure
Base price with tax:
Salesprice with discount:
$15.95
Discount:
Tax amount:
Price / KG:
Read more

Tropical Engineering Concrete, Wood, Metals - 3 PDH

2014-08-25T11:55:30-07:00

Course Outline

1. CONCRETE

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Microbiological Corrosion Control - 3 PDH

2016-06-25T17:40:19-07:00

This course discusses microbiological and corrosion control in cooling water systems. Microbiological organisms are composed of three classes: algae, bacteria, and fungus. Large biological organisms such as clams, snails, mussels, or similar species are referred to as macrobiological organisms. The presence of any biological growth can be detrimental to cooling tower operations. Problems include fouling, corrosion, and loss of efficiency. These problems can lead to downtime, higher operating

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Foundations In Areas of Significant Frost Penetration - 3 PDH

2014-08-19T15:12:02-07:00

Course Outline

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Impressed Current Cathodic - 3 PDH

2015-11-13T11:48:07-08:00

Course Description

This course provides an introduction to impressed current cathodic protection systems. There are two principle methods of

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Secondary Wastewater Treatment - 5 PDH

2014-03-25T10:51:41-07:00

Course Outline

1. General considerations

2. Trickling filter plants

3. Activated sludge plants

4. Wastewater treatment ponds

5. Sewage treatment in hot climates

6. Special considerations for cold climates

7. References

Learning Objectives

Learn design basis and criteria for trickling filter
Base price with tax:
Salesprice with discount:
$19.95
Discount:
Tax amount:
Price / KG:
Read more

Architectural Design: Libraries - 3 PDH

2014-03-26T12:23:11-07:00

Architectural Design: Libraries PDH - Learning Objectives

Learn about typical space allowances for small, medium and large libraries.
Learn about the five core functional areas in libraries.
Learn typical site size, configuration and orientation requirements.
Learn about architectural criteria for the circulation desk, circulation spaces, general collection stacks, reference desk,
Base price with tax:
Salesprice with discount:
$11.95
Discount:
Tax amount:
Price / KG:
Read more

Hydraulic Design of Sewers - 3 PDH

2014-03-25T10:40:54-07:00

Course Outline

1. Quantity of Wastewater

2. Gravity Sewer Design

3. Required Pumping Capacity

4. Depressed Sewers

5. Hydrogen Sulfide in Sewers

6. Manholes

7. Building Connections

8. Cleanouts

9. Pumping Stations and Equipment

Learning Objectives

Learn how to evaluate the contributing population for the sewer system.
Learn about Average
Base price with tax:
Salesprice with discount:
$11.95
Discount:
Tax amount:
Price / KG:
Read more

Asphalt Concrete Pavement Recycling - 3 PDH

2014-08-22T13:17:03-07:00

Course Outline

1. Introduction

2. Surface

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Area Drainage Systems - 5 PDH

2016-06-06T11:04:58-07:00

This course will introduce you to normal requirements for designof surface and subsurface drainage systemsfor residential, commercial, institutional and industrial areas. You will learn about predesign investigations, environmental considerations, hydrologic studies, hydraulic design considerations, erosion control and subsurface drainage. References and a bibliography are provided that will allow you to advance beyond this introductory course and begin to address area drainage

Base price with tax:

Salesprice with discount:

$19.95

Discount:

Tax amount:

Price / KG:

Passive Solar Buildings - 3 PDH

2014-03-25T10:45:47-07:00

Course Outline

I. Systems

A. Direct gain heating

B. Daylighting

C. Radiant panels

D. Thermosiphoning air panels

E. Thermal storage walls

1. Trombe walls

2. Concrete block walls

3. Water

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Cathodic Concepts - 3 PDH

2015-09-28T14:11:43-07:00

Course Description

This course provides the basic concepts of cathodic protection, together with important criteria and

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Water Supply Systems - 5 PDH

2017-04-06T03:46:11-07:00

Course Introduction
This is an introduction to the methods, procedures and equipment employed in operating and maintaining water treatment plants.

Course Summary
After completion of this course you will be better prepared to operate and maintain domestic water treatment systems and equipment.

Course Description
This publication provides an introduction to maintenance inspections and general maintenance services

Base price with tax:

Salesprice with discount:

$19.95

Discount:

Tax amount:

Price / KG:

Bearing Capacity Analysis - 3 PDH

2014-08-22T12:11:14-07:00

Course Outline

1. Bearing capacity of soils

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Rock Mass Characterization - 3 PDH

2016-06-05T08:36:24-07:00

This course provides guidance in the description and engineering classification of intact rock and rock masses, the types, applications and analyses of rock property tests, the evaluation of intact rock and rock mass properties, and the selection of design parameters for project structures founded on rock. Rock mass characterization refers to the compilation of information and data to build a complete conceptual model of the rock foundation in which all geologic features that might control

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Activated Sludge Wastewater Treatment Plants - 3 PDH

2014-08-12T19:35:28-07:00

Course Outline

1. INTRODUCTION

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Tropical Engineering: Mechanical, Electrical, Miscellaneous - 3 PDH

2014-08-25T12:08:51-07:00

Course Outline

1. MECHANICAL

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Geophysical Exploration Magnetic Subsurface - 9 PDH

2016-10-17T22:00:20-07:00

This course provides an introduction to magnetic and subsurface methods for geophysical exploration. An overview of the spectrum of geophysical exploration methods is provided followed by more detailed discussions of magnetic and subsurface methods. Magnetic issues discussed include magnetometers, field intensities and subsurface metals. Subsurface methods discussed include in-hole logging, log analysis, borehole effects, spontaneous potential logging, single point

Base price with tax:

Salesprice with discount:

$35.95

Discount:

Tax amount:

Price / KG:

Building Design Specifications and Tools - 3 PDH

2014-03-25T10:19:52-07:00

Course Outline

I. Background and history

II. Design guidance

A. Building types

B. Space types

C. Design disciplines

D. Design objectives

E. Products and systems

III. Project management

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Pavement Design in Seasonal Frost Conditions - 5 PDH

2014-08-22T10:28:30-07:00

Course Outline

Base price with tax:

Salesprice with discount:

$19.95

Discount:

Tax amount:

Price / KG:

Makeup Water Industrial Water - 3 PDH

2015-11-14T06:37:54-08:00

Course Description

This course provides an introduction to makeup water for Industrial water systems. Many installations use fresh water and, often, potable water. Makeup water, often referred to as “makeup,” is fresh water

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Laboratory Testing of Soils - 5 PDH

2014-03-25T10:43:47-07:00

Course Outline

1. Introduction

2. Index Properties Tests

3. Permeability Tests

4. Consolidation Tests

5. Shear Strength Tests

6. Dynamic Testing

7. Tests on Compacted Soils

8. Tests on Rock

Learning Objectives

Learn how dynamic tests are used to evaluate foundation support characteristics under repeated loadings such as a drop forge, traffic, or earthquake; and the
Base price with tax:
Salesprice with discount:
$19.95
Discount:
Tax amount:
Price / KG:
Read more

Drainage Pipe Strength, Cover, and Bedding - 3 PDH

2014-08-22T13:35:41-07:00

Course Outline

1. INTRODUCTION

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Levees Seepage Slope Settlement - 3 PDH

2016-06-25T06:53:26-07:00

This course will introduce you to methods for controlling seepage and settlement in the construction of levees, and to generally acceptable guidelines for levee slopes. Without control, underseepage in pervious foundations beneath levees may result in (a) excessive hydrostatic pressures beneath an impervious top stratum on the landside, (b) sand boils, and (c) piping beneath the levee itself. Underseepage problems are most acute where a pervious substratum underlies a levee and extends both

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Advanced Wastewater Treatment - 5 PDH

2014-03-25T10:14:34-07:00

Learning Objectives

It is important to continue learning innovative sewage handling techniques. At the conclusion of this course, the student will

Be familiar with the basic components of a valve and
Base price with tax:
Salesprice with discount:
$19.95
Discount:
Tax amount:
Price / KG:
Read more

Central Heating Plant Planning - 3 PDH

2014-08-19T14:24:09-07:00

Specific Knowledge and Skill Obtained

Learn about….

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Cathodic Protection Inspection Testing - 5 PDH

2015-10-12T12:19:37-07:00

Course Description

This discussion includes criteria and inspection actions that, when used either separately or in combination, will indicate whether adequate cathodic protection of a metallic piping system has been achieved. The effectiveness of

Base price with tax:

Salesprice with discount:

$19.95

Discount:

Tax amount:

Price / KG:

Water Systems Pumps and Drivers - 3 PDH

2017-04-06T19:27:36-07:00

Course Introduction
This course will introduce you to important considerations in design of systems for pumping water.

Course Summary
Upon completion of this course you will have an understanding of the basic considerations you need to know to develop ground and surface water pumped supplies for all types of developments.

Course Description
This course covers the operation of pumps used in water supply systems.

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Flexible Pavement Design - 3 PDH

2014-03-25T10:35:24-07:00

Course Outline

I. INTRODUCTION

A. Basis of Design

B. Computer Aided Design

II. PRELIMINARY INVESTIGATIONS

A. General

B. Investigations of Site

C. Soil Conditions

D. Borrow Areas

III. VEHICULAR TRAFFIC

A. Effect

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Concrete Pavements - 7 PDH

2014-08-22T12:19:16-07:00

Course Outline

1. Purpose

Base price with tax:

Salesprice with discount:

$27.95

Discount:

Tax amount:

Price / KG:

Hydroelectric Power Plant Structures - 3 PDH

2016-06-05T09:08:16-07:00

The course discusses location, configuration and design considerations for hydroelectric powerhouses. The factors affecting the location include: Location of the spillway (when powerhouse is located adjacent to the dam). Location of navigation locks (on navigation projects). Foundation conditions. Valley width. River channel conditions below dam. Accessibility. Location of switchyard and transmission lines. At projects where the powerhouse is located at the dam adjacent to the

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Field Explorations for Foundations - 3 PDH

2014-08-12T20:14:54-07:00

Course Outline

1. Investigational programs

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Water Supply Systems Operation and Maintenance - 3 PDH

2014-08-26T10:01:00-07:00

Course Outline

1. INTRODUCTION

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Steel Bridge Maintenance - 3 PDH

2017-04-04T09:02:23-07:00

Course Introduction
This is an introduction to the factors to consider in inspecting and repairing steel bridges.

Course Summary
This course will help you to address a variety of bridge inspection situations that may be encountered.

Course Description

This course discusses steel bridge maintenance and repair. Preventive maintenance of steel bridge components consists mainly of measures to protect the

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Retaining Walls And Excavation Support Systems - 3 PDH

2014-08-22T10:48:29-07:00

Course Outline

1. Design considerations for retaining walls

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG:

Marine Fueling Facilities - 3 PDH

2015-11-14T06:45:11-08:00

Course Description

This course provides an introduction to the design of marine applications of petroleum fueling facilities. Design of marine fuel receiving and dispensing facilities for the purpose of receiving fuel

Base price with tax:

Salesprice with discount:

$11.95

Discount:

Tax amount:

Price / KG: